How To Play Back - Subaru 2013 Legacy, 2013 Outback Owner's Manual

5-30
Audio
. Do not store an iPod
®
vehicle. If an iPod is left in the
vehicle for a long period of time,
it may be deformed, discolored
or damaged by high temperature.
NOTE
. Even if a USB storage device or
®
iPod is connected, it cannot be played
®
unless the USB/iPod
lected.
. Movies stored on a USB storage
®
device or an iPod cannot be played
while the storage device or iPod
connected to the system.
. While an iPod ®
is connected, the
®
iPod cannot be operated using the
®
click wheel on the iPod
models).
. When using an iPod ®
by connecting
it to in-vehicle equipment, the order of
the list items displayed on the in-
vehicle equipment may be different
®
from that on the iPod . However, this
does not indicate a malfunction.
. An iPod
®
battery that is connected
to in-vehicle equipment will be charged
when the ignition switch is in the "ON"
or "Acc" position. However, activation
®
of the iPod may be delayed if the
battery charge of the iPod
. If an iPod ®
does not activate after
®
operation, disconnect the connection
in the
cable from the iPod
the resetting procedure, see the User's
Guide for the iPod
. If an iPod
are connected improperly, the iPod
cannot be powered on or will not be
recognized by in-vehicle equipment. In
this case, disconnect the connection
cable from the iPod
it again.
mode is se-
®
is
(except some
The USB connector is located in the
center console. Use the connector to
connect a USB storage device/iPod
®
is low.
®
and reset it. For
®
.
®
and the connection cable
®
, and then connect
®
.
& How to play back
NOTE
. Depending on the number of files
®
stored on the iPod
®
® version, the iPod may not activate
smoothly after operation or not work
properly.
. Do not disconnect the connector
®
from the iPod during iPod
! Type A audio
1. Connect a USB storage device/iPod
2. Press the button. Each time you
briefly press the button, the mode
changes as follows.
®
When the USB/iPod
the player will start playback of the USB
®
storage device/iPod .
! Type B audio
! When a USB storage device/iPod
not connected
Connect a USB storage device/iPod
Then the player will start playback of the
USB storage device/iPod
and the firmware
®
operation.
®
.
mode is selected,
®
is
®
.
®
.