Show Sntp Status - HP BladeSystem bc2000 - Blade PC Reference Manual

Clock Commands

show sntp status

The show status Privileged EXEC mode command shows the status of the Simple Network
Time Protocol (SNTP).
Syntax
show sntp status
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8, unicast
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 2006)
Unicast servers:
Server
-----------
176.1.1.8
176.1.8.179
Anycast Server:
Server
---------
176.1.11.8
Broadcast:
Interface
---------
176.9.1.1
6-18
Status Last Response
------- ----------------------------
Up 19:58:22.289 PDT Feb 19 2006
Unknown 12:17.17.987 PDT Feb 19 2006
Interface Status Last Response
------- ----- -----------------------------
VLAN 118 Up 9:53:21.789 PDT Feb 19 2006
Interface Last Response
--------- ----------------------------
VLAN 119 19:17:59.792 PDT Feb 19 2006
www.hp.com
Offset Delay [mSec]
[mSec]
------ ------
7.33 117.79
8.98 189.19
Offset Delay
[mSec] [mSec]
------ -----
7.19 119.89
HP PC Blade Switch CLI Reference Guide