History Size - HP BladeSystem bc2000 - Blade PC Reference Manual

Line Commands

history size

The history size Line Configuration mode command configures the command history buffer size
for a particular line. To reset the command history buffer size to the default configuration, use the
no form of this command.
Syntax
history size number-of-commands
no history size
Parameters
number-of-commands — Number of commands that the system records in its history buffer.
n
(Range: 10-216)
Default Setting
The default history buffer size is 10.
Command Mode
Line Configuration mode
Command Usage
This command configures the command history buffer size for a particular line. To configure the
command history buffer size for the current terminal session, use the terminal history size User
EXEC mode command. The maximum number of commands in all buffers is 256.
Example
The following command changes the command history buffer size to 100 entries for a particular
line.
Console(config-line)# history size 100
13-6 www.hp.com HP PC Blade Switch CLI Reference Guide