Show Copper-Ports Cable-Length - HP BladeSystem bc2000 - Blade PC Reference Manual

show copper-ports cable-length

The show copper-ports cable-length User EXEC mode command displays the estimated copper
cable length attached to a port.
Syntax
show copper-ports cable-length [interface]
Parameters
interface — A valid Ethernet port. (Full syntax: port)
n
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
The port must be active and working in 100M or 1000M mode.
Example
The following command displays the estimated copper cable length attached to all ports.
Console> show copper-ports cable-length
Port
----
e43
e44
e45
e46
HP PC Blade Switch CLI Reference Guide
Length [meters]
---------------------
< 50
Copper not active
110-140
Fiber
www.hp.com
PHY Diagnostics Commands
15-3