Rmon Table-Size - HP BladeSystem bc2000 - Blade PC Reference Manual

rmon table-size

The rmon table-size Global Configuration mode command configures the maximum size of
RMON tables. To return to the default configuration, use the no form of this command.
Syntax
rmon table-size {history entries | log entries}
no rmon table-size {history | log}
Parameters
history entries — Maximum number of history table entries. (Range: 20-270)
n
log entries — Maximum number of log table entries. (Range: 20-100)
n
Default Setting
History table size is 270.
Log table size is 200.
Command Mode
Global Configuration mode
Command Usage
The configured table size takes effect after the device is rebooted.
Example
The following command configures the maximum RMON history table sizes to 100 entries.
Console(config)# rmon table-size history 100
HP PC Blade Switch CLI Reference Guide www.hp.com
RMON Commands
20-17