Ip Http Authentication - HP BladeSystem bc2000 - Blade PC Reference Manual

ip http authentication

The ip http authentication Global Configuration mode command specifies authentication
methods for HTTP server users. To return to the default configuration, use the no form of this
command.
Syntax
ip http authentication method1 [method2...]
no ip http authentication
Parameters
method1 [method2...] — Specify at least one from the following table:
n
Keyword
local
none
radius
tacacs
Default Setting
The local user database is checked. This has the same effect as the command ip http
authentication local.
Command Mode
Global Configuration mode
Command Usage
The additional methods of authentication are used only if the previous method returns an error,
not if it fails. To ensure that the authentication succeeds even if all methods return an error,
specify none as the final method in the command line.
Example
The following command configures the HTTP authentication.
Console(config)# ip http authentication radius local
HP PC Blade Switch CLI Reference Guide
Description
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
www.hp.com
AAA Commands
3-7