Dot1X Guest-Vlan Enable - HP BladeSystem bc2000 - Blade PC Reference Manual
Command line interface reference guide hp bladesystem pc blade switch
Hide thumbs
Also See for BladeSystem bc2000 - Blade PC:
- User manual (216 pages) ,
- Administrator's manual (104 pages) ,
- Setup and installation manual (104 pages)
Table of Contents
Advertisement
802.1x Commands
dot1x guest-vlan enable
The dot1x vlans guest-vlan enable Interface Configuration mode command enables
unauthorized users on the interface access to the Guest VLAN. To disable access, use the no
form of this command
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Parameters
There are no parameters for this command.
Default Setting
Disabled.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
A device can have only one global guest VLAN. The guest VLAN is defined using the dot1x
guest-vlan Interface Configuration mode command.
Example
The following command enables unauthorized users on Ethernet port e1 to access the guest VLAN.
Console# configure
Console(config)# interface ethernet e1
Console(config-if)# dot1x guest-vlan enable
2-22
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
