Qos Commands; Qos - HP BladeSystem bc2000 - Blade PC Reference Manual

qos

The qos Global Configuration mode command enables Quality of Service (QoS) on the device.
To disable QoS on the device, use the no form of this command.
Syntax
qos [basic | advanced]
no qos
Parameters
basic — QoS basic mode. This mode is applied if no keyword is specified.
n
advanced — QoS advanced mode, which enables the full range of QoS configuration.
n
Default Setting
The QoS basic mode is enabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command enables QoS on the device.
Console(config)# qos
HP PC Blade Switch CLI Reference Guide

QoS Commands

www.hp.com
18
18-1