AAA Commands
enable authentication
The
authentication Line Configuration mode command specifies the authentication
enable
method list when accessing a higher privilege level from a remote telnet or console. To return to
the default configuration specified by the aaa authentication enable command, use the no form
of this command.
Syntax
enable authentication {default | list-name}
no enable authentication
Parameters
default — Uses the default list created with the aaa authentication enable command.
n
list-name — Uses the indicated list created with the aaa authentication enable command.
n
Default Setting
Uses the default set with the aaa authentication enable command.
Command Mode
Line Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command specifies the default authentication method when accessing a higher
privilege level from a console.
Console(config)# line console
Console(config-line)# enable authentication default
3-6
www.hp.com
HP PC Blade Switch CLI Reference Guide