Sntp Unicast Client Poll - HP BladeSystem bc2000 - Blade PC Reference Manual

Clock Commands

sntp unicast client poll

The sntp unicast client poll Global Configuration mode command enables polling for the
Simple Network Time Protocol (SNTP) predefined unicast servers. To disable the polling for
SNTP client, use the no form of this command.
Syntax
sntp unicast client poll
no sntp unicast client poll
Parameters
There are no parameters for this command.
Default Setting
Polling is disabled.
Command Mode
Global Configuration mode
Command Usage
Polling time is determined by the sntp client poll timer Global Configuration mode command.
Example
The following command enables polling for SNTP predefined unicast clients.
Console(config)# sntp unicast client poll
6-14 www.hp.com HP PC Blade Switch CLI Reference Guide