Show Bridge Multicast Filtering - HP BladeSystem bc2000 - Blade PC Reference Manual

show bridge multicast filtering

The show bridge multicast filtering User EXEC mode command displays the multicast filtering
configuration.
Syntax
show bridge multicast filtering vlan-id
Parameters
vlan-id — VLAN ID value.
n
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the Multicast configuration for VLAN 1.
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port
----
e1
e2
e3
HP PC Blade Switch CLI Reference Guide
Forward-Unregistered
Static Status
--------- ---------
Forbidden Filter
Forward Forward(s)
- Forward(d)
www.hp.com
Address Table Commands
Forward-All
Static Status
--------- ----------
Forbidden Filter
Forward Forward(s)
- Forward(d)
5-19