Interface Range Ethernet - HP BladeSystem bc2000 - Blade PC Reference Manual

Ethernet Configuration Commands

interface range ethernet

The interface range ethernet Global Configuration mode command configures multiple
Ethernet type interfaces at the same time.
Syntax
interface range ethernet {port-range | all}
port-range — List of valid ports. Where more than one port is listed, separate
n
nonconsecutive ports with a comma and no spaces, use a hyphen to designate a range of
ports and group a list separated by commas in brackets.
all — All Ethernet ports.
n
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Commands under the interface range context are executed independently on each active interface
in the range. If the command returns an error on one of the active interfaces, it does not stop
executing commands on other active interfaces.
Example
The following example shows how odd ports e1 to e39 are grouped to receive the same
command.
Console(config)# interface range ethernet
e(1,3,5,7,9,11,13,15,17,19,21,23,25,27,29,31,33,35,37,39)
Console(config-if)#
8-2 www.hp.com HP PC Blade Switch CLI Reference Guide