PLC-HF10000L Expand Serial Command Functional Specifications
8.7.6 CF_CORNER-DL Command
Command
"CF_CORNER-DL%1"[CR]
"UP" ------------ Correct the horizontal line of image upwards
"DN" ------------ Correct the horizontal line of image downwards
%1
"LEFT" --------- Correct the vertical line of image to the left
"RIGHT" ------- Correct the vertical line of image to the right
Correct the bottom-left corner of the image.
(Available in normal Power ON status only)
The correction starts with the first command received
Details
Projector returns error code ""101 and no operation is made when exceeding the
correction limit.
Acceptable
Response
Unacceptable
8.7.7 CF_CORNER-DR Command
Command
"CF_CORNER-DR_%1"[CR]
"UP" ------------ Correct the horizontal line of image upwards
"DN" ------------ Correct the horizontal line of image downwards
%1
"LEFT" --------- Correct the vertical line of image to the left
"RIGHT" ------- Correct the vertical line of image to the right
Correct the bottom-right corner of the image.
(Available in normal Power ON status only)
The correction starts with the first command received
Details
Projector returns error code ""101 and no operation is made when exceeding the
correction limit.
Acceptable
Response
Unacceptable
8.7.8 CF_CORNERTESTPAT Command
Command
"CF_CORNERTESTPAT_%1"[CR]
"RED" ------------Select Red
"WHITE" -------- Select White
%1
"BLUE" ---------- Select Blue
"OFF" ------------ Select Off
Display test patterns for Corner correction.
(Available in normal Power ON status only)
Details
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
Acceptable
Response
Unacceptable
8.7.9 CF_KEYSTONEMODE Command
Command
"CF_KYSTNMODE _%1" [CR]
"STR" --------- Set Keystone store mode to Store
%1
"RST" --------- Set Keystone store mode to Reset
Details
Set Keystone store mode (Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
37/105