Cr_Filremain Command; Cr_Ptimemode Command; Cr_Ptimer Command; Cr_Ptime Command - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

9.10.20 CR_FILREMAIN Command

Command "CR_FILREMAIN" [CR]
Details Get remaining number of usable Filter scroll
Acceptable
Response
%1
Unacceptable
9.1.1

CR_PTIMEMODE Command

Command "CR_PTIMEMODE" [CR]
Details Get setting status of count up/down mode in P-timer
Acceptable
Response
Unacceptable
9.1.2

CR_PTIMER Command

Command "CR_PTIMER" [CR]
Details Get setting status of P-timer
Acceptable
Response
Unacceptable
9.1.3

CR_PTIME Command

Command "CR_PTIME" [CR]
Details Get setting time for count down mode of P-timer
Acceptable
Response
Unacceptable

9.10.21 CR_TESTPAT Command

Command "CR_TESTPAT" [CR]
Details Get setting status of Test pattern
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"09" = Remaining number of usable Filter scroll : 9 times
ÿ
"00" = Remaining number of usable Filter scroll : 0 time
"Error Code" [CR]
"000_%a" [CR]
"COUNTUP" -------------------- Set P-timer to Count up mode
%1
"COUNTDN" -------------------- Set P-timer to Count down mode
"Error Code" [CR]
"000_%a" [CR]
"ON" -------------------- P-timer is activated
%1 "STOP" ---------------- P-timer is
"OFF" ------------------ Exit P-timer function
"Error Code" [CR]
"000_%a" [CR]
%1 "001" – "180" ----------------------- 1 to 180 minutes
"Error Code" [CR]
"000_%1" [CR]
"COLOR" ---------------------- Color bar is displayed
"GRAD1" ---------------------- 16step(white→black) is displayed
"GRAD2" ---------------------- 16step(white←black) is displayed
"GRAD3" ---------------------- 16step(white↓black) is displayed
"GRAD4" ---------------------- 16step(white↑black) is displayed
"WHITE" ---------------------- All white is displayed
"BLACK" ---------------------- All black is displayed
"CROSS" --------------------- Cross is displayed
"OFF" -------------------------- Test pattern display is not displayed
"Error Code" [CR]
90/105
temporarily suspended