9Ÿ; Status Read Command; Format; Transfer Example - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

Status Read Command

9ÿ

9.1 Format

1) PC issues a command in the format below:
"CR_Command" [CR]
Command: String
2) When the projector receives the applicable command, it returns the required information
as a data string.
"000_" %1 [CR]
%1: required Information (a data string. Refer to [Basic Status Read Command Table])
3) When the received data cannot be decoded, the projector returns "?" [CR]

9.2 Transfer Example

Getting total dots of the projector by Expand Serial Commands
PC → PJ: "CR_TDOTS" [CR]
PC ← PJ: "000_1344" [CR]

9.3 Operation condition

Basically it should be always operated.
64/105