Cf_Vpos Command; Cf_Hscale Command - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

8.7.13 CF_VPOS Command

Command "CF_VPOS_%1" [CR]
"015" --------------------- +15
"014" --------------------- +14
ÿ
"001" --------------------- +1
"000" --------------------- ±0
" 01" --------------------- 1
%1
ÿ
" 14" --------------------- 14
" 15" --------------------- 15
"UP" --------------------- Increment setting value of Vposition by 1
"DN" --------------------- Decrement setting value of Vposition by 1
Set V Position (Available only in the normal Power ON status)
*When selected screen mode is a setting except Custom, return "101" [CR] and
Details
the command is not executed.
* When input is no signal, return "101" [CR] and the command is not executed.
Acceptable
Response
Unacceptable

8.7.14 CF_HSCALE Command

Command "CF_HSCALE_%1" [CR]
"035" ---------------------- +35
"031" ---------------------- +31
ÿ
"002" ---------------------- +2
"001" ---------------------- +1
"000" ---------------------- ±0
" 01" --------------------- 1
%1
" 02" --------------------- 2
ÿ
" 31" --------------------- 31
" 32" --------------------- 32
"UP" --------------------- Increment setting value of Hscale by 1
"DN" --------------------- Decrement setting value of Hscale by 1
Set Hscale (Available only in the normal Power ON status)
*When selected screen mode is a setting except Custom, return "101" [CR] and
Details
the command is not executed.
* When input is no signal, return "101" [CR] and the command is not executed.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
39/105