Functional Execution Command Table; Image Command Table; Pc Control Command Table - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

Functional Execution Command Table

5ÿ

5.1 Image Command Table

Execute command
CF_CONT_%1[CR]
CF_BRIGHT_%1[CR]
CF_COLOR_%1[CR]
CF_TINT_%1[CR]
CF_COLMNSAV_%1[CR]
CF_COLMNLD_%1[CR]
CF_APCTRL_%1[CR]
CF_COLTEMP_%1[CR]
CF_WBAL-R_%1[CR]
CF_WBAL-G_%1[CR]
CF_WBAL-B_%1[CR]
CF_OFFSET-R_%1 [CR]
CF_OFFSET-G_%1 [CR]
CF_OFFSET-B_%1 [CR]
CF_SHARP_%1[CR]
CF_GAMMA_%1[CR]
CF_NZRED_%1[CR]
CF_PROGV_%1[CR]
CF_IMAGE_%1[CR]
CF_IMAGEADJ_%1[CR]
CF_ADVCOL_%1[CR]

5.2 PC Control Command Table

Execute command
CF_FSYNC_%1[CR]
CF_TDOTS_%1[CR]
CF_CLAMP_%1[CR]
CF_H-POS_%1[CR]
CF_V-POS_%1[CR]
CF_DDOTS_%1[CR]
CF_DLINE_%1[CR]
CF_ORGMODE_%1[CR]
CF_PCSTORE_%1[CR]
CF_PCMODEFREE_%1 [CR]
Item
Set value of Contrast
Set value of Brightness
Set value of Color
Set value of Tint
Set area to store current values of Color Management
Set area to load values of Color Management
Set level of Auto Picture Control
Set level of Color Temperature
Set Red value of White Balance
Set Green value of White Balance
Set Blue value of White Balance
Set Red value of Offset
Set Green value of Offset
Set Blue value of Offset
Set value of Sharpness
Set value of Gamma
Set ON/OFF of Noise reduction
Set mode of Progressive scan
Set Image mode
Set Store/Reset of values in Image Adjustment
Set mode of Advanced color setting
Item
Set value of Fine Sync
Set value of Total Dots
Set value of Clamp
Set value of Horizontal Position
Set value of Vertical Position
Set value of Display Dots
Set value of Display Line
Specify the original signal for the selected PC mode
Store current setting values in PC Adjust menu to
Mode %1
Delete the values registered in Mode %1 and return it to
Free status.
13/105