Cr_Modelist Command; Cr_Srcinp1 Command; Cr_Srcinp2 Command - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

9.7.5 CR_MODELIST Command

Command "CR_MODELIST" [CR]
Details Get possible modes for Mode list
Acceptable
Response
%1
Unacceptable

9.7.6 CR_SRCINP1 Command

Command "CR_SRCINP1" [CR]
Details Get Source of Input1
Acceptable
Response
%1
Unacceptable

9.7.7 CR_SRCINP2 Command

Command "CR_SRCINP2" [CR]
Details Get Source of Input 2
Acceptable
Response
%1
Unacceptable
"000_%1_%2_---_%x" [CR]
Error Code "101" is returned except for PC-Analog and for no
signal with PC-Analog
Possible modes in Mode1-10 are returned when PC-Analog
signal is coming.
"MODE1"
"MODE2"
"MODE3"
:
:
"MODE8"
"MODE9"
"MODE10"
"Error Code" [CR]
"000_%1" [CR]
"DIGITAL" ---------------------- in Computer mode
"ANALOG"" -------------------- in Computer mode
"VIDEO" ------------------------- in Video mode
"S-VIDEO" ---------------------- in Video mode
"YPBPR" ------------------------ in Component mode
"SDI1" --------------------------- in DF-SDI1 mode
"SDI2" --------------------------- in DF-SDI2 mode
"HDCP" ------------------------- in HDCP mode
"SCART"------------------------- in SCART mode
"HDMI" -------------------- in HDMI mode
"LINKA-YCBCR" -------- in LINK-A(YCBCR1) mode
"LINKB-YCBCR" -------- in LINK-B(YCBCR1) mode
"DUAL-YCBCR1" --------- in DUAL(YCBCR1) mode
"DUAL-YCBCR2" -------- in DUAL(YCBCR2) mode
"DUAL-YCBCR3" -------- in DUAL(YCBCR3) mode
"DUAL-YCBCR4" -------- in DUAL(YCBCR4) mode
"DUAL-RGB1" -------- in DUAL(RGB1) mode
"DUAL-RGB2" -------- in DUAL(RGB2) mode
"BLANK" ------------------------ There is no input source
"NOCARD" --------------------- There is no board inserted
"?" [CR]
"000_%1" [CR]
The same data as CF_SRCINP1
"?" [CR]
76/105