Screen Status Read Command Table; Lamp Status Read Command Table - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications
CR_SRCINP1 [CR]
CR_SRCINP2 [CR]
CR_SRCINP3 [CR]
CR_SRCINP4 [CR]
CR_HMSLOT [CR]
CR_NMSLOT1 [CR]
CR_NMSLOT2 [CR]
CR_NMSLOT3 [CR]
CR_NMSLOT4 [CR]
CR_IDSLOT1 [CR]
CR_IDSLOT2 [CR]
CR_IDSLOT3 [CR]
CR_IDSLOT4 [CR]

6.5 Screen Status Read Command Table

Status read command
CR_SCREEN [CR]
CR_KYSTNMODE[CR]
CR_CORNERTESTPAT [CR]
CR_CEIL[CR]
CR_REAR[CR]
CR_VSCALE[CR]
CR_VPOS[CR]
CR_HSCALE[CR]
CR_HPOS[CR]
CR_SCREENASPECT[CR]

6.6 Lamp Status Read Command Table

Status read command
CR_LAMPREPL [CR]
CR_LAMPMODE [CR]
CR_LAMPCONSTTAR[CR]
CR_LAMPCONSTCUR[CR]
CR_AUTOLAMPCONTROL[CR]
CR_LAMPSTS [CR]
CR_INFLAMP [CR]
CR_PROJH [CR]
CR_HMLAMP [CR]
CR_LAMPH [CR]
CR_LAMPCORRESPH [CR]
CR_LAMPINTERVAL [CR]
CR_LAMPLIFECONTROL [CR]
Get selected source for Input 1
Get selected source for Input 2
Get selected source for Input 3
Get selected source for Input 4
Get the total number of Slots
Get a card name inserted to Slot 1
Get a card name inserted to Slott2
Get a card name inserted to Slot 3
Get a card name inserted to Slot 4
Get ID information of Slot 1
Get ID information of Slot 2
Get ID information of Slot 3
Get ID information of Slot 4
Get selected screen size
Get selected Keystone store mode
Get setting of test pattern for Corner correction.
Get selected ON/OFF of Ceiling
Get selected ON/OFF of Rear
Get setting status of V Scale
Get setting status of V Position
Get setting status of H Scale
Get setting status of H Position
Get setting status of Screen aspect
Get information on Lamp replacement time
Get selected Lamp mode
Get the Target value in Constant mode
Get the Current value in Constant mode
Get setting status of dimmer function level.
Get Lamp lighting status
Get Lamp switching status
Get the projector total running time
Get the total number of lamps
Get information of actual Lamp running time
Get lamp running time multiplied by a coefficient
Get Lamp interval status
Get Lamp life control status
18/105
Item
Item