Cr_P-Mane Command; Cr_P-Manetime Command; Cr_On-Sta Command; Cr_Security Command - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

9.10.10 CR_P-MANE Command

Command "CR_P-MANE" [CR]
Details Get setting status of Power management
Acceptable
Response
%1
Unacceptable

9.10.11 CR_P-MANETIME Command

Command "CR_P-MAETIME" [CR]
Details Get setting time for starting Power Management function
Acceptable
Response
%1
Unacceptable

9.10.12 CR_ON-STA Command

Command "CR_ON-STA" [CR]
Details Get Direct on setting status
Acceptable
Response
%1
Unacceptable

9.10.13 CR_SECURITY Command

Command "CR_ SECURITY" [CR]
Details Get ON/OFF setting status of Security on menu.
Acceptable
Response
%1
Unacceptable

9.10.14 CR_PJLOCKNOW Command

Command "CR_PJLOCKNOW" [CR]
Details Get actual setting status of PIN code lock
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"OFF" ------------------------ Power Management is disabled
"READY" -------------------- Power Management is set to Ready
"SHUTDOWN" -----Power Management is set to Shut Down mode
"?" [CR]
"000_%1" [CR]
"001 – 030" ----------------------- 1 to 30 minutes
"?" [CR]
"000_%1" [CR]
"ON" -------------------------- Direct on is set to ON.
"OFF" ------------------------ Direct on is set to OFF.
"?" [CR]
"000_%1" [CR]
"ON" ------------ PJ is locked
"OFF" ----------- PJ is not locked.
"Error Code" [CR]
"000_%1" [CR]
"LOCK" ------ PJ is locked
PIN code lock is set to ON1/ON2 on the menu and PJ PIN
code is not entered, therefore PJ is actually locked.
"FREE" ------- PJ is unlocked (either A or B)
A) PJ lock is set to OFF on the menu
B) PJ lock is set to ON1/ON2 on the menu, but PIN code Lock
mode is canceled because PJ PIN code is entered.
"Error Code" [CR]
88/105