Cr_Keydis Command; Cr_Shutrcprot Command; Cr_Shutkeyprot Command; Cr_Shuth Command - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

9.10.22 CR_KEYDIS Command

Command "CR_KEYDIS" [CR]
Details Get setting status of RC/KEY use limitation (valid or invalid)
Acceptable
Response
%1
Unacceptable

9.10.23 CR_SHUTRCPROT Command

Command "CR_SHUTRCPROT" [CR]
Details Get status if Shutter can be controlled by R/C
Acceptable
Response
%1
Unacceptable

9.10.24 CR_SHUTKEYPROT Command

Command "CR_SHUTKEYPROT" [CR]
Details Get status if Shutter can be controlled by key on the side panel
Acceptable
Response
%1
Unacceptable

9.10.25 CR_SHUTH Command

Command "CR_SHUTH" [CR]
Details Get time setting to start the shutter management
Acceptable
Response
%1
Unacceptable

9.10.26 CR_SHUTEFFECT Command

Command "CR_SHUTEFFECT" [CR]
Details Get status of Shutter effect function.
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"NONE" ------------------------- RC & KEY are valid
"RC" ----------------------------- RC is invalid
"KEY" --------------------------- KEY is invalid
"?" [CR]
"000_%1" [CR]
"ON" -------------------- Shutter is not controllable by R/C
"OFF" ------------------- Shutter is controllable by R/C
"?" [CR]
"000_%1" [CR]
"ON" ----------- Shutter is not controllable by key on the side panel
"OFF" ---------- Shutter is controllable by key on the side panel
"?" [CR]
"000_%1" [CR]
"005" -------------------- 5 minutes
"006" -------------------- 6 minutes
:
"479" -------------------- 479 minutes
"480" -------------------- 480 minutes
"?" [CR]
"000_%1" [CR]
"OFF" --------Fade in / out function is set to Off.
"L1" --------- Fade in / out function is set to L1.
"L2" --------- Fade in / out function is set to L2.
"Error Code" [CR]
91/105