Cf_Lampinterval Command - Sanyo PLC-HF10000L - 10000 Lumens Manual

PLC-HF10000L Expand Serial Command Functional Specifications

8.8.5 CF_LAMPINTERVAL Command

Command "CF_LAMPINTERVAL_%1" [CR]
"0024" --------------------------- Set Lamp interval to 24 hours
"0200" --------------------------- Set Lamp interval to 200 hours
"0500" --------------------------- Set Lamp interval to 500 hours
%1
"1000" --------------------------- Set Lamp interval to 1000 hours
"2000" --------------------------- Set Lamp interval to 2000 hours
"OFF" ---------------------------- Set Lamp interval to OFF
Select Lamp interval. (Valid only when in the normal Power ON status.)
Details The value set by this command is stored in EEPROM and the setting remains
effective after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
42/105