User Waypoints - Garmin G900X Pilot's Manual

FLIGHT MANAGEMENT

USER WAYPOINTS

The G900X can create and store up to 1,000 user-defined waypoints. User waypoints can be created from
any map page (except PFD Inset Map, AUX-Trip Planning Page, or Procedure Pages) by selecting a position on
the map using the Joystick, or from the User Waypoint Information Page by referencing a bearing/distance
from an existing waypoint, bearings from two existing waypoints, or latitude and longitude. Once a waypoint
has been created, it can be renamed, deleted, or moved. Temporary user waypoints are erased upon system
power down.
Selecting a User Waypoint:
1) With the User Waypoint Information Page displayed, enter the name of the User Waypoint, or scroll to the
desired waypoint in the User Waypoint List using the large FMS Knob.
2) Press the ENT Key.
3) Press the FMS Knob to remove the flashing cursor.
Or :
1) With the Nearest User Waypoints Page displayed, press the FMS Knob.
2) Press the ENT Key or turn either FMS Knob to select an identifier in the Nearest USR Box.
3) Press the FMS Knob to remove the flashing cursor.
226
Selected User Waypoint Navigation Map Showing Selected User Waypoint
Figure 5-51 User Waypoint Information Page
Garmin G900X Pilot's Guide
User Waypoint Info
- Identifier
- Temporary/Normal
- Waypoint Type
User Wpt Comment
Reference Wpt Info
- Identifier
- Radial/Distance
User Waypoint List
- Identifier
- Comment
# User Wpts Used
Softkeys
190-00726-00 Rev. J