Garmin G900X Pilot's Manual page 61

3) Turn the large FMS Knob to highlight 'RENAME' in the Pilot Profile Box.
4) Press the ENT Key.
5) In the 'Rename Profile' window, turn the FMS Knob to select the profile to rename.
6) Press the ENT Key.
7) Use the FMS Knob to enter a new profile name up to 16 characters long and press the ENT Key.
8) With 'RENAME' highlighted, press the ENT Key.
9) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
Deleting a profile:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight 'DELETE' in the Pilot Profile Box.
4) Press the ENT Key.
5) In the 'Delete Profile' window, turn the FMS Knob to select the profile to delete.
6) Press the ENT Key.
7) With 'DELETE' highlighted, press the ENT Key.
8) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
If an SD card is inserted into the top slot of the MFD, pilot profiles may imported from the SD card into the
system, or exported from the system to the SD card.
Because system settings may vary from one airframe to another, always verify system settings from an
imported profile are consistent with the desired settings.
Importing a profile from an SD card:
1) Insert an SD card containing the pilot profile(s) into the top card slot on the MFD.
2) Turn the FMS Knob to select the AUX - System Setup Page.
3) Select the IMPORT Softkey.
Or:
a) Press the MENU Key.
b) Turn the FMS Knob to highlight 'Import Pilot Profile' and press the ENT Key.
4) The system displays the Pilot Profile Importing window with 'IMPORT' highlighted. To change the selected
profile to be imported from the SD card (shown as 'SELECT FILE'), turn the large FMS Knob to highlight the
profile file name, then turn the small FMS Knob to highlight a profile from the list, and press the ENT Key.
5) If desired, the profile name to be used after profile has been imported can be changed by turning the FMS
Knob to highlight the 'PROFILE NAME' field, then use the large and small FMS Knobs to enter the name, and
press the ENT Key. Imported profile names cannot begin with a blank space or be named 'DEFAULT', 'GARMIN
DEFAULTS' or 'DEFAULT SETTINGS'.
190-00726-00 Rev. J Garmin G900X Pilot's Guide
SYSTEM OVERVIEW
45