Winds Aloft (Wind) - Garmin G900X Pilot's Manual

Displaying raw METAR text on the Active Flight Plan Page:
1) Select the Active Flight Plan Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight a waypoint with an associated METAR. The METAR text will appear in the
SELECTED WAYPOINT WEATHER window below.
4) When finished, press the FMS Knob to remove the cursor or press the FPL Key to exit the Active Flight Plan
Page.
To display the METAR legend on the Weather Data Link (GFDS) Page, press the LEGEND Softkey when
METARs are selected for display.
The METAR flag color is determined by the information in the METAR text. The METAR flag is gray when
the METAR text does not contain adequate information.
WINDS ALOFT
The Winds Aloft weather product (Figure 6-80) shows the predicted wind speed and direction at the
surface and at selected altitudes. Altitude can be displayed in 3,000-foot increments from the surface up to
42,000 feet MSL.
Displaying Winds Aloft information:
1) Select the Weather Data Link (GFDS) Page.
2) Press the MORE WX Softkey.
3) Press the WIND Softkey.
4) Select the desired altitude level: SFC (surface) up to 42,000 feet. Press the NEXT or PREV Softkey to cycle
through the altitude softkeys. The WIND Softkey label changes to reflect the altitude selected.
190-00726-00 Rev. J
Figure 6-79 METAR Legend
Garmin G900X Pilot's Guide
HAZARD AVOIDANCE
389