Operation - Garmin G900X Pilot's Manual

OPERATION

The GTS 800/820 automatically changes from STANDBY to OPERATE mode eight seconds after
NOTE:
takeoff. The unit also automatically changes from OPERATE to STANDBY mode 24 seconds after landing.
After power-up, the GTS 800/820 is in Standby Mode. The GTS 800/820 must be in Operating Mode for
traffic to be displayed and for TAs to be issued.
Selecting the OPERATE Softkey allows the traffic unit to switch from Standby Mode to Operating Mode as
necessary. Selecting the STANDBY Softkey forces the unit into Standby Mode.
Switching from operating mode to standby mode:
On the Traffic Page, select the STANDBY Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select 'Standby Mode'.
2) Press the ENT Key.
Switching from standby mode to operating mode:
O n the Traffic Page, select the OPERATE Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select 'Operate Mode'.
2) Press the ENT Key. The traffic unit switches from Standby Mode to Operating Mode as necessary.
190-00726-00 Rev. J
Garmin G900X Pilot's Guide
HAZARD AVOIDANCE
471