Garmin G900X Pilot's Manual page 39

1 NAV VOL/ID Knob Turn to control NAV audio volume (shown in the NAV Frequency Box as a
2
NAV Frequency
Transfer Key
3
NAV Knob
4
Heading Knob
5
Joystick
6 CRS/BARO Knob
7 COM Knob
8
COM Frequency
Transfer Key
(EMERG)
9
COM VOL/SQ Knob Turn to control COM audio volume level (shown as a percentage in the COM
10
Direct-to Key (
11
FPL Key
12 CLR Key
(DFLT MAP)
13
MENU Key
14 PROC Key
15
ENT Key
190-00726-00 Rev. J
percentage)
Press to toggle Morse code identifier audio ON/OFF
Transfers the standby and active NAV frequencies
Turn to tune NAV receiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle light blue tuning box between NAV1 and NAV2
Turn to manually select a heading
Press to display a digital heading momentarily to the left of the HSI and synchronize
the Selected Heading to the and current heading
Turn to change map range
Press to activate Map Pointer for map panning
Turn large knob for altimeter barometric pressure setting
Turn small knob to adjust course (only when HSI is in VOR or OBS Mode)
Press to re-center the CDI and return course pointer directly TO bearing of active
waypoint/station
Turn to tune COM transceiver standby frequencies (large knob for MHz; small for
kHz)
Press to toggle light blue tuning box between COM1 and COM2
The selected COM (green) is controlled with the COM MIC Key (Audio Panel).
Transfers the standby and active COM frequencies
Press and hold 2 seconds to tune the emergency frequency (121.5 MHz) automatically
into the active frequency field
Frequency Box)
Press to turn the COM automatic squelch ON/OFF
) Activates the direct-to function and allows the user to enter a destination waypoint
and establish a direct course to the selected destination (specified by identifier,
chosen from the active route)
Displays flight plan information
Erases information, cancels entries, or removes menus
Press and hold to display the MFD Navigation Map Page (MFD only).
Displays a context-sensitive list of options for accessing additional features or making
setting changes
Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and
approach procedures (IAPs) for a flight plan or selected airport
Validates/confirms menu selection or data entry
Garmin G900X Pilot's Guide
SYSTEM OVERVIEW
23