Piston Leaning Assist Mode - Garmin G900X Pilot's Manual

PISTON LEANING ASSIST MODE

A leaning assist function is available on the Engine Page to assist in the leaning process. While in Leaning
Assist Mode, the EIS Display is shown along with the Fuel Flow Gauge, Fuel Calculations Group, and an
expanded Engine Temperature Group.
Accessing Leaning Assist Mode:
1) Press the ENGINE Softkey to open the Engine Page.
2) Press the ASSIST Softkey to identify the peak.
3) Press the ASSIST Softkey again to exit Leaning Assist Mode.
TURBOCHARGED
Once the ASSIST Softkey is pressed, the peak of each TIT is indicated by a light blue bar which moves
and remains at the peak Turbo Inlet Temperature. For the TEO-540 iE2 (FADEC), a single TIT is indicated.
EIS Display
Peak TIT
(Blue Marker)
190-00726-00 Rev. J
Fuel Flow Gauge
Figure 3-20 Leaning Assist Mode (IV/IV-P with TSIO-550-E)
Garmin G900X Pilot's Guide
ENGINE INDICATION SYSTEM
Fuel
Calculations
TIT Deviation
From Peak
Peak TIT
(Blue Bar)
Lean/Rich
From Peak
111