Piston Eis Display (Reversionary Mode) - Garmin G900X Pilot's Manual

PISTON EIS DISPLAY (REVERSIONARY MODE)

In the event of a PFD1, PFD2 (if installed) or MFD display failure, the display(s) operating in Reversionary
Mode are configured to present PFD symbology together with the EIS Display (refer to the System Overview for
information about display reversionary mode). In reversionary mode, the EIS is separated into three displays:
Engine, Lean, and System
The Engine Display, in reversionary mode, is identical to the normal EIS Display on the MFD.
EIS Display
190-00726-00 Rev. J
Figure 3-22 Reversionary Mode (ES Shown)
Garmin G900X Pilot's Guide
ENGINE INDICATION SYSTEM
113