Garmin G900X Pilot's Manual page 90

FLIGHT INSTRUMENTS
Navigation angles (track, heading, course, bearing) are corrected to the computed magnetic variation ('Mag
Var') or referenced to true north (denoted 'T'), set on the AUX - System Setup Page. When an approach
referenced to true north has been loaded into the flight plan, the system generates a message to change the
navigation angle setting to 'True' at the appropriate time.
Changing the navigation angle setting:
1) Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight 'Nav Angle' in the 'Display Units' box.
4) Turn the small FMS Knob to highlight the desired setting and press the ENT Key.
• TRUE - References angles to true north (denoted with 'T')
• MAGNETIC - Angles corrected to the computed magnetic variation ('Mag Var')
74
Figure 2-20 Heading and Course Indications (True)
Figure 2-21 Navigation Angle Settings
(AUX - System Setup Page)
Garmin G900X Pilot's Guide 190-00726-00 Rev. J