HAZARD AVOIDANCE
Adjusting antenna tilt on the Vertical Scan display:
1) Press the TILT Softkey to activate the cursor in the TILT field and display the Tilt Line.
If the Tilt Line is not displayed, press the MENU Key and turn the large FMS Knob to select Show Tilt Line. Press
the ENT Key.
2) Turn the small FMS Knob to adjust the antenna tilt angle. The selected tilt angle is implemented when Horizontal
Scan is again selected.
The RANGE Knob can also be used to adjust tilt.
412
Scan Line
Figure 6-107 Adjusting Tilt on Vertical Scan Display
Garmin G900X Pilot's Guide
Tilt Line
190-00726-00 Rev. J