CO ALERT RESET
If the optional CO Guardian carbon monoxide detector issues a warning for high carbon monoxide levels,
the CO RST Softkey is available on MFD to reset the CO Guardian.
Resetting a CO Guardian alert:
1) On the MFD, press the ENGINE Softkey.
2) Press the FUEL Softkey.
3) Press the CO RST Softkey (available only when a CO alert is occurring) (Figure 3-34).
Refer to the CO Guardian documentation for further information.
190-00726-00 Rev. J
CO Warning Issued
Figure 3-34 Carbon Monoxide Alert Reset
(Epic LT Shown)
Garmin G900X Pilot's Guide
ENGINE INDICATION SYSTEM
Select to Reset CO Guardian
129