Garmin G900X Pilot's Manual page 169

Manual NAV frequency tuning from the Control Unit
1) Press the NAV Key to enable the FMS Knob for NAV tuning. The NAV Tuning Selection Box is shown.
2) Press the NAV Key again, if needed, to select the desired NAV radio (1 or 2).
3) Turn the FMS Knob to tune the desired frequency in the NAV Tuning Box (large knob for MHz; small knob for
kHz).
Or :
Press the numeric keys on the keypad to enter a Frequency.
4) Press the Frequency Transfer Key to transfer the frequency to the active field.
If an error is made during frequency entry with the numeric keypad, pressing the BKSP Key moves the
cursor back one space. If an incorrect frequency is entered, reenter the correct one using the same procedure.
190-00726-00 Rev. J
Third, Press the Frequency
Transfer Key to Move the
Frequency to the Active Field.
First, Press the NAV Key to activate NAV
tuning from the FMS Knob or Numeric
Keypad
Second, Turn the FMS Knob or Press
the Numeric Keys to Enter a Frequency
into the NAV Standby Frequency Box
Figure 4-25 Frequency Tuning from the Control Unit
Garmin G900X Pilot's Guide
AUDIO PANEL AND CNS
153