Garmin G900X Pilot's Manual page 626

ADDITIONAL FEATURES
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the 'TO' field. Enter the desired
telephone number or email address. Entry can be accomplished through the alphanumeric keys on the MFD
Controller, or combination of the FMS Knob on the controller and softkeys on the MFD. The FMS Knob is used
to enter letters and numbers, or numbers can be entered from the MFD by selecting the NUMBERS Softkey.
Press the CAP LOCK Softkey to create upper and lower case alpha characters. Special characters can be
accessed by selecting the SYMBOLS Softkey. See Figure 8-86.
3) Press the ENT Key. The cursor is now displayed in the 'MESSAGE' field.
4) Enter the desired message using any combination of entry methods as described in step 2.
5) Press the ENT Key.
6) Press the SEND Softkey to send the message immediately, or press the SAVE Softkey to save the message in
Outbox for sending at a later time. Press the CANCEL Softkey to delete the message.
PREDEFINED TEXT MESSAGES
Time and effort can be saved in typing text messages that are used repeatedly by saving these messages as
a predefined message.
Creating a predefined text message:
1) While viewing the AUX-TEXT MESSAGING Page, press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to select 'Edit Predefined Messages' as shown in Figure 8-87.
3) Press the ENT Key. The PREDEFINED MESSAGES view is now displayed.
4) Press the NEW Softkey.
Or :
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on 'Draft New Predefined Message'.
c) Press the ENT Key. The PREDEFINED SMS TEXT MESSAGE Window is now displayed as shown in Figure 8-88.
610
Figure 8-87 Creating/Editing Predefined Messages
Garmin G900X Pilot's Guide
190-00726-00 Rev. J