Turboprop Eis Display (Reversionary Mode) - Garmin G900X Pilot's Manual

ENGINE INDICATION SYSTEM

TURBOPROP EIS DISPLAY (REVERSIONARY MODE)

In the event of a PFD1, PFD2 (if installed) or MFD display failure, the display(s) operating in Reversionary
Mode are configured to present PFD symbology together with the EIS Display (refer to the System Overview for
information about display reversionary mode). In reversionary mode, the EIS is separated into three displays:
Engine, System, and Fuel.
In reversionary mode, the Engine, System, and Fuel displays are identical to the displays in normal mode.
EIS Display
130
Figure 3-35 Reversionary Mode (Evolution Shown)
Garmin G900X Pilot's Guide
190-00726-00 Rev. J