Hardware Features-Srx1400 Services Gateway - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

JUNOS OS 10.4 Release Notes
Table 4: SRX220 Services Gateway Built-In Hardware Interfaces (continued)
Interface Type
Mini-Physical Interface Module
(Mini-PIM)
104
Specifications
Two slots for Mini-PIMs
NOTE: We strongly recommend that only transceivers provided by Juniper
Networks be used on an SRX220 Services Gateway. We cannot guarantee
that the interface module will operate correctly if third-party transceivers
are used. Contact Juniper Networks for the correct transceiver part number
for your device.
Hardware Features—SRX1400 Services Gateway
Introduction on page 104
Supported Models on page 105
Hardware Features on page 105
Physical Specifications on page 106
Introduction
This release supports the SRX1400 Services Gateway.
Juniper Networks SRX1400 Services Gateway expands the SRX Series family of
next-generation security platforms, delivering market-leading performance and extensive
service integration to 10 gigabits per second (10 Gbps) environments that require the
features without the massive scalability and aggregated throughput provided by Juniper
Networks SRX3000 line and SRX5000 line. The SRX1400 Services Gateway provides
firewall support with key features such as IP Security (IPsec), virtual private network
(VPN), and high-speed deep packet inspection features such as intrusion detection and
prevention (IDP).
The SRX1400 is ideally suited for small to medium-size data centers, enterprise, and
service provider network security deployments where consolidation of security
functionality, uncompromised 10 Gbps performance, compact environmental footprint,
and affordability are key requirements.
The SRX1400 Services Gateway is three rack units (U) tall. Sixteen devices can be stacked
in a single floor-to-ceiling rack, for increased port density per unit of floor space. The
device provides common form-factor module (CFM) slots that can be populated with
Network and Services Processing Card (NSPC), and I/O cards (IOCs). The device also
Description
The Mini-PIM slots can be used to
provide LAN and WAN functionality
along with connectivity to various media
types.
For more information about the
supported Mini-PIMs, see the SRX Series
Services Gateways for the Branch
Physical Interface Modules Hardware
Guide.
Copyright © 2010, Juniper Networks, Inc.