Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note page 150

JUNOS OS 10.4 Release Notes
150
help mitigate this issue, note any changes you make to the BIOS configuration so that
you can revert to the default BIOS configuration as needed. [PR/237722]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the SNMP set for the MIB
object
usmUserPrivKeyChange
Installation
On SRX100, SRX210, SRX240, or SRX650 devices with 1-GB storage flash, when you
use the command to copy the Junos OS package from
file copy
directory, you might get a message saying that the file system is full. Do not use the
command to get the Junos OS package for software upgrade.
file copy
The command copies the Junos OS package as a temporary file
file copy
and then copies the file with a package name in a local directory under the
partition. This means that a Junos OS package of size X needs 2X space in the
partition. For example, a Junos OS package of 197 MB will need 394 MB, whereas the
/cf/var partition is less than 350 MB on a 1-GB storage flash. Thus, the
command will fail. [PR/526030]
Integrated Convergence Services
The following issues currently exist in SRX210 and SRX240 devices with Integrated
Convergence Services:
SNMP does not provide support for survivable call server (SRX Series SCS) statistics.
[PR/456454]
On SRX210 devices with voice capability, SIP trunking or FXS trunking calls do not work
if the called party supports only the G729AB/G711-Mu-law codec. [PR/504135]
On SRX240 devices with Integrated Convergence Services, the call-pickup feature
does not work in survivable mode. If an analog station in a station group rings, another
analog phone belonging to the same station group cannot pick up the call. As a
workaround, configure three SIP phones (S1, S2, and S3), and add them to the pickup
group (use a station group with S1, S2, and S3) because the pickup group works for
SIP phones, but it does not work for analog phones. [PR/505237]
On SRX240 devices with Integrated Convergence Services running in survivable mode,
if two SIP stations are in a call and if either of the SIP stations attempts to park the
call by dialing the parking number 7000, the call is not parked. [PR/505240]
On SRX210 and SRX240 devices with Integrated Convergence Services, if the transport
method for the peer call server is TCP, the SRX Series devices do not support SIP
messages of more than 2048 bytes. [PR/510291]
On SRX210 and SRX240 devices with voice capability, the T1PRI calls do not work
when multiple trunk-groups or trunks are created. [PR/514784]
On SRX210 and SRX240 devices with voice capability, the caller ID of the calling party
is displayed as a four-digit local extension number instead of a 7-or 10-digit local or
international number for outgoing calls from PRI. [PR/516021]
On SRX210 and SRX240 devices with Integrated Convergence Services, if you have
the accounting feature configured (Services>Convergence services>Features), you
cannot configure the account code on a per-station basis. [PR/516681]
does not work. [PR/482475]
Copyright © 2010, Juniper Networks, Inc.
to a local
ftp://<path>
in/cf/var/tmp
/cf/var
/cf/var
file copy