Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note page 155

Issues in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
J-Web
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the LEDs on the Routing
Engine and PICs are not shown as green when they are up and online on the J-Web
Chassis View. [PR/297693]
On SRX100, SRX210, SRX240, and SRX650 devices, the LED status in the Chassis View
is not in sync with the LED status on the device. [PR/397392]
On SRX210 Low Memory devices, in the rear view of the Chassis View image, the image
of the ExpressCard remains the same whether a 3G card is present or not. [PR/407916]
On SRX Series devices, the CLI Terminal feature does not work in J-Web over IPv6.
[PR/409939]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, in J-Web, the Generate
Report option under Monitor Event and Alarms opens the report in the same webpage.
[PR/433883]
On SRX100 devices, in J-Web users can configure the scheduler without entering any
stop date. The device submits the scheduler successfully, but the submitted value is
not displayed on the screen or saved in the device. [PR/439636]
On SRX100, SRX210, SRX240, SRX650, and all J Series devices, in J-Web, the options
Input filter and Output filter are displayed in the VLAN configuration page. These options
are not supported, and the user cannot obtain or configure any value under these filter
options. [PR/460244]
On SRX100, SRX210, SRX240, SRX650, and all J Series devices, when you have a large
number of static routes configured, and if you have navigated to pages other than to
page 1 in the Route Information table in the J-Web interface (Monitor>Routing>Route
Information), changing the Route Table to query other routes refreshes the page but
does not return you to page 1. For example, if you run the query from page 3 and the
new query returns very few results, the Route Information table continues to display
page 3 with no results. To view the results, navigate to page 1 manually. [PR/476338]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the entry registered into
RIB is not shown in J-Web. [PR/483885]
On SRX210 Low Memory, SRX210 High Memory, and SRX210 PoE devices, in the J-Web
interface, Configuration>Routing>Static Routing does not display the IPv4 static route
configured in rib inet.0. [PR/487597]
On SRX100 (Low Memory and High Memory), SRX210 (Low Memory, High Memory,
and PoE), SRX240 (Low Memory and High Memory), SRX650, J2350, J4350, and J6350
devices, CoS feature commits occur without validation messages, even if you have not
made any changes. [PR/495603]
On J2350 and SRX210 High Memory devices, you cannot use the Move down button
for moving the IPS rule in IDP policy page. You must use the Move down button in the
landing page. [PR/499499]
On SRX Series and J Series devices, in the J-Web interface, the button does
move/edit
not work for the exempt rulebase on the IDP Policy configuration page. As a workaround,
Copyright © 2010, Juniper Networks, Inc. 155