Application Layer Gateways (Algs); Appsecure - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

Changes in Default Behavior and Syntax in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
Copyright © 2010, Juniper Networks, Inc.

Application Layer Gateways (ALGs)

The
show security alg msrpc object-id-map
option to permit the output to be restricted to a particular node or to query the entire
cluster. The
show security alg msrpc object-id-map node
<node-id | all | local | primary>

AppSecure

On SRX1400, SRX3400, SRX3600, SRX5600, and SRX5800 devices, when you create
custom application or nested application signatures for Junos OS application
identification, the order value must be unique among all predefined and custom
application signatures. The order value determines the application-matching priority
of the application signature.
NOTE: The order value range for predefined signatures is 1 through 32,767.
We recommend that you use an order range higher than 32,767 for custom
signatures.
The order value is set with the
application-name signature order
values by entering the show services application-identification | display set | match order
command. You will need to change the order number of the custom signature if it
conflicts with another application signature.
CLI command has a chassis cluster node
.
set services application-identification application
command. You can also view all signature order
CLI command options are
111