Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note page 47

Changes in Default Behavior and Syntax in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
Table 2: Routing Engines Displaying DIMM Information
Routing Engines
RE-S-1800x2 and RE-S-1800x4
RE-A-1800x2
Copyright © 2010, Juniper Networks, Inc.
New configuration statement to enable the processing of IPv4-mapped IPv6
addresses—Junos OS introduces the
at the hierarchy level. By default, the Junos OS disables the processing
[edit system]
of IPv4-mapped IPv6 packets to protect against malicious packets from entering the
network. To enable the processing of such IPv4-mapped IPv6 packets, include the
allow-v4mapped-packets
[System Basics]
New option introduced for the
command—Junos OS now provides the
command. This option enables you to view CLI configuration details without
inheritance
inline comments marked with
[CLI User Guide]
Enhancement to the
show chassis sibs
now displays an appropriate reason when a SIB transitions to the
instance, if ths SIB is taken offline using the
of the command displays
show chassis sibs
[System Basics and Services Command Reference]
New option for the
ping mpls l2vpn
and
l2vpn ping mpls l2circuit
you to specify the reply mode for the ping request. The
application-level-control-channel
[System Basics and Services Command Reference]
Enhancement to the output of the
command now displays DIMM information for the following
chassis hardware detail
Routing Engines:
[System Basics and Services Command Reference]
Enhancement to the show chassis fpc
now displays accurate temperature readings for the FPC.
[System Basics and Services Command Reference]
allow-v4mapped-packets
statement in the CLI configuration.
show | display inheritance
no-comments
## .
command—The
request chassis sib
--- Offlined by cli command ---
and
ping mpls l2circuit
commands provide a new option
, , and
ip-udp no-reply
show chassis hardware detail
Routers
MX240, MX480, and MX960 routers
M120 and M320 routers
command—The
configuration statement
operational mode
option for the
show | display
command
show chassis sibs
Offline state. For
command, the output
in the output.
commands—The
ping mpls
that enables
reply-mode
reply-mode option provides the
options.
command—The show
show chassis fpc command
47