Errata And Changes In Documentation For Junos Os Release 10.4 For M Series, Mx Series, And T Series Routers; Changes To The Junos Os Documentation Set - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

JUNOS OS 10.4 Release Notes
Related
Documentation
Errata and Changes in Documentation for Junos OS Release 10.4 for M Series, MX Series, and
T Series Routers
66
information sent to the Packet Forwarding Engine. [PR/541998: This issue has been
resolved.]
In a Live/Standby MVPN extranet setup, with the primary provider on PE1, the backup
provider on PE2, and a receiver on PE3 and receivers also on PE1 and PE2, traffic drops
occur for 25 seconds after every 35 seconds. [PR/542984: This issue has been resolved.]
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
on page 6
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for M Series, MX
Series, and T Series Routers on page 37
Errata and Changes in Documentation for Junos OS Software Release 10.4 for M Series,
MX Series, and T Series Routers on page 66
Upgrade and Downgrade Instructions for Junos OS Release 10.4 for M Series, MX Series,
and T Series Routers on page 70

Changes to the Junos OS Documentation Set

The following are the changes made to the Junos OS documentation set:
The term "Multiplay" has been replaced with "Session Border Control" in the Junos OS
Release Notes.
The Integrated Multi-Service Gateway (IMSG) pathway page now includes three
complete configuration examples:
IMSG—Basic Configuration
IMSG—Dual BGFs
IMSG—Server Clusters
The configuration examples are applicable to Junos OS Release 10.2 and later.
The Junos OS Layer 2 Configuration Guide provides an overview of the Layer 2 functions
supported on Juniper Networks routers, including configuring bridge domains, MAC
addresses and VLAN learning and forwarding, and spanning-tree protocols. It also
details the routing instance types used by Layer 2 applications. This material was
formerly covered in the Junos OS MX Series Ethernet Services Routers Layer 2
Configuration Guide.
The title of the Junos OS Hierarchy and RFC Reference is now Junos OS Hierarchy and
Standards Reference.
Documentation for the extended DHCP relay agent feature is no longer included in the
Policy Framework Configuration Guide. For DHCP relay agent documentation, see the
Subscriber Access Configuration Guide or the documentation for subscriber access
management.
Copyright © 2010, Juniper Networks, Inc.