Protocols Hierarchy - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

Copyright © 2010, Juniper Networks, Inc.
set interfaces t1-1/0/0 transmit-bucket
set interfaces t1-1/0/0 encapsulation ether-vpls-ppp
set interfaces t1-1/0/0 encapsulation extended-frame-relay
set interfaces t1-1/0/0 encapsulation extended-frame-relay-tcc
set interfaces t1-1/0/0 encapsulation frame-relay-port-ccc
set interfaces t1-1/0/0 encapsulation satop
set interfaces t1-1/0/0 unit 0 encapsulation ether-vpls-fr
set interfaces t1-1/0/0 unit 0 encapsulation frame-relay-ppp
set interfaces t1-1/0/0 unit 0 layer2-policer
set interfaces t1-1/0/0 unit 0 radio-router
set interfaces t1-1/0/0 unit 0 family inet dhcp
set interfaces t1-1/0/0 unit 0 inverse-arp
set interfaces t1-1/0/0 unit 0 multicast-dlci
VLAN Interface CLI
The following CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set interfaces vlan unit 0 family tcc
set interfaces vlan unit 0 family vpls
set interfaces vlan unit 0 accounting-profile
set interfaces vlan unit 0 layer2-policer
set interfaces vlan unit 0 ppp-options
set interfaces vlan unit 0 radio-router

Protocols Hierarchy

On SRX100, SRX210, SRX220, SRX240, and SRX650 devices, the following CLI
commands are not supported. However, if you enter these commands in the CLI editor,
they will appear to succeed and will not display an error message.
set protocols bfd no-issu-timer-negotiation
set protocols bgp idle-after-switch-over
Unsupported CLI
129