System Hierarchy; Ipv6 And Mvpn Cli - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

Copyright © 2010, Juniper Networks, Inc.

System Hierarchy

On all SRX100, SRX210, SRX220, SRX240, and SRX650 devices, the following system
hierarchy CLI commands are not supported. However, if you enter these commands
in the CLI editor, they appear to succeed and do not display an error message.
set system diag-port-authentication

IPv6 and MVPN CLI

On SRX1400, SRX3400, SRX3600, SRX5600, and SRX5800 devices, the following
multicast IPv6 and MVPN CLI commands are not supported. However, if you enter
these commands in the CLI editor, they will appear to succeed and will not display an
error message.
show pim interfaces inet6
show pim neighbors inet6
show pim source inet6
show pim rps inet6
show pim join inet6
show pim mvpn
show multicast next-hops inet6
show multicast rpf inet6
show multicast route inet6
show multicast scope inet6
show multicast pim-to-mld-proxy
show multicast statistics inet6
show multicast usage inet6
show msdp sa group group
set protocols pim interface interface family inet6
set protocols pim disable interface interface family inet6
set protocols pim family inet6
set protocols pim disable family inet6
set protocols pim apply-groups group disable family inet6
set protocols pim apply-groups group family inet6
set protocols pim apply-groups-except group disable family inet6
Unsupported CLI
131