Maximizing Alg Sessions; Integrated Convergence Services Not Supported; Upgrade And Downgrade Instructions For Junos Os Release 10.4 For Srx - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

JUNOS OS 10.4 Release Notes

Maximizing ALG Sessions

Integrated Convergence Services Not Supported

176
Known Limitations in Junos OS Release 10.4 for SRX Series Services Gateways and J
Series Services Routers on page 133
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for SRX Series
Services Gateways and J Series Services Routers on page 109
Issues in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services
Routers on page 143
Upgrade and Downgrade Instructions for Junos OS Release 10.4 for SRX Series Services
Gateways and J Series Services Routers on page 177
Errata and Changes in Documentation for Junos OS Release 10.4 for SRX Series Services
Gateways and J Series Services Routers on page 166
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, by default, the session
capacity number for RTSP, FTP, and TFTP ALG sessions is 10,000 per flow SPU. The
option enables you to increase defaults as follows:
maximize-alg-sessions
RTSP, FTP, and TFTP ALG session capacity: 25,000 sessions per flow SPU
TCP Proxy connection capacity: 40,000 sessions per flow SPU
NOTE: Flow session capacity will be reduced to half per flow SPU and the
above capacity numbers will not change on the central point SPU.
You can configure maximum ALG sessions as follows:
security {
forwarding-process {
application-services {
maximize-alg-sessions;
}
}
}
You must reboot the device (and its peer in the chassis cluster) for the configuration to
take effect.
Integrated Convergence Services is no longer supported. The Media-Gateway (MGW)
versions of SRX Series low-end devices have been discontinued and are no longer
supported. If you have an ICS-supported SKU, please contact Juniper Networks for further
guidance.
Copyright © 2010, Juniper Networks, Inc.