Class-Of-Service Hierarchy; Ethernet-Switching Hierarchy; Firewall Hierarchy; Interfaces Cli Hierarchy - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

Copyright © 2010, Juniper Networks, Inc.

Class-of-Service Hierarchy

On SRX100, SRX210, SRX220, SRX240, SRX650, and J Series devices, the following
class-of-service hierarchy CLI commands are not supported. However, if you enter
these commands in the CLI editor, they appear to succeed and do not display an error
message.
set class-of-service classifiers ieee-802.1ad
set class-of-service interfaces interface-name unit 0 adaptive-shaper

Ethernet-Switching Hierarchy

On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
ethernet-switching hierarchy CLI commands are not supported. However, if you enter
these commands in the CLI editor, they appear to succeed and do not display an error
message.
set ethernet-switching-options bpdu-block disable-timeout
set ethernet-switching-options bpdu-block interface
set ethernet-switching-options mac-notification
set ethernet-switching-options voip interface access-ports
set ethernet-switching-options voip interface ge-0/0/0.0 forwarding-class

Firewall Hierarchy

On SRX100, SRX210, SRX220, SRX240 SRX650, and all J Series devices, the following
Firewall hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set firewall family vpls filter
set firewall family mpls dialer-filter d1 term

Interfaces CLI Hierarchy

On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
interface hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error message.
Aggregated Interface CLI on page 126
ATM Interface CLI on page 126
Ethernet Interfaces on page 127
GRE Interface CLI on page 127
IP Interface CLI on page 128
Unsupported CLI
125