J-Web Interface; Layer 2 And Layer 3 Protocols; Management And Rmon - Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note

JUNOS OS 10.4 Release Notes
Related
Documentation
190
might not recognize the LACP messages sent by the EX4200 switch and the links
therefore become standalone links. [PR/505069: This issue has been resolved.]
On a 40-port SFP+ line card in an EX8200 switch, if you assign different shaping rates
to different ports in a port group, you do not receive an error message when you commit
the configuration, and no error is logged in the system log. As a workaround, configure
the same shaping rate on all ports in a port group. [PR/524073: This issue has been
resolved.]
In a Q-in-Q tunneling configuration that includes aggregated Ethernet interfaces (LAGs),
after a process restart, the member interfaces in the VLAN might be incorrectly
pfem
set. [PR/527117: This issue has been resolved.]

J-Web Interface

In the J-Web interface, the automatic command-completion feature might not be
disabled in the password field. As a workaround, you can disable the automatic
command-completion feature in the browser. [PR/508425: This issue has been
resolved.]
In the J-Web interface, when you select the Ethernet Switching Monitor page (
> Switching > Ethernet Switching
[PR/535200: This issue has been resolved.]
In the LACP (Link Aggregation Control Protocol) Configuration page in the J-Web
interface (Configure > Interfaces > Link Aggregation), the Delete button is disabled
even when you select an aggregated Ethernet interface configured with a physical
interface, VLAN, and IP option. As a workaround, delete the physical interface, VLAN,
and IP option from the aggregated Ethernet interface using the CLI. [PR/546411]
In the J-Web interface, when you use an https connection in the Microsoft Internet
Explorer browser, you cannot upload (Maintain > Config Management > Upload) or
download (Maintain > Config Management > History > Configuration History) a
configuration file. As a workaround, use an http connection. [PR/5512000: This issue
has been resolved.]

Layer 2 and Layer 3 Protocols

If there are many joins associated with a neighbor and that neighbor goes down and
comes back up quickly, then those joins might be stranded in an unresolved state until
the command is issued. [PR/539962: This issue has been resolved.]
clear pim join

Management and RMON

On EX4200 switches, the LACP process (
lookup is performed. [PR/533226: This issue has been resolved.]
New Features in Junos OS Release 10.4 for EX Series Switches on page 178
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for EX Series Switches
on page 180
Limitations in Junos OS Release 10.4 for EX Series Switches on page 181
), the MAC learning log might not display information.
) creates core files when SNMP MIB
lacpd
Copyright © 2010, Juniper Networks, Inc.
Monitor