Juniper JUNOS OS 10.4 - RELEASE NOTES Release Note page 149

Copyright © 2010, Juniper Networks, Inc.
Issues in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
address, the user should manually clear the ipip cleartext sessions with the concentrator
address. The dual-stack lite concentrator will affect the traffic flow. [PR/541747]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices under high traffic load,
some part of FTP and TFTP control sessions might not get timed out even after two
hours of stopping the traffic. [PR/548250]
On SRX5800 devices, in NAT mode, when SIP traffic is sent from the device packet
drop is seen at the beginning and later processing of traffic stops. [554685]
On SRX3400 and SRX3600 devices, when external radius server is down or terminated,
the mass of authentication requests could cause
[PR/568659]
Hardware
On SRX210 devices, the MTU size is limited to 1518 bytes for the 1-port SFP Mini-PIM.
[PR/296498]
On SRX240 devices, the Mini-PIM LEDs glow red for a short duration (1 second) when
the device is powered on. [PR/429942]
On SRX240 devices, the file installation fails on the right USB slot when both of the
USB slots have USB storage devices installed. [PR/437563]
On SRX240 devices, the combinations of Mini-PIMs cause SFP-copper links to go down
in some instances during bootup, restarting fwdd, and restarting chassisd. As a
workaround, reboot the device and the link will be up. [PR/437788]
Infrastructure
On J Series devices, you cannot use a USB device that provides U3 features (such as
the U3 Titanium device from SanDisk Corporation) as the media device during system
boot. You must remove the U3 support before using the device as a boot medium. For
the U3 Titanium device, you can use the U3 Launchpad Removal Tool on a
Windows-based system to remove the U3 features. The tool is available for download
at http://www.sandisk.com/Retail/Default.aspx?CatID=1415
use the U3 Launchpad Installer Tool accessible at
http://www.sandisk.com/Retail/Default.aspx?CatID=1411
On J Series devices, if the device does not have an ARP entry for an IP address, the
device drops the first packet from itself to that IP address. [PR/233867]
On J Series devices, when you press the F10 key to save and exit from BIOS configuration
mode, the operation might not work as expected. As a workaround, use the Save and
Exit option from the Exit menu. This issue can be seen on the J4350 and J6350 devices
with BIOS Version 080011 and on the J2320 and J2350 devices with BIOS Version
080012. [PR/237721]
On J Series devices, the
work as expected. This issue can be seen on the J4350 and J6350 routers with BIOS
Version 080011 and on the J2320 and J2350 routers with BIOS Version 080012. To
authd
option in the BIOS configuration mode does not
Clear NVRAM
to generate a core file.
. (To restore the U3 features,
). [PR/102645]
149