Online Led - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

ERX 11.3.x Module Guide
114
NOTE: The REDUNDANT LED on the cOCx/STMx, FE-8, GE/FE, and HSSI
modules is nonfunctional.
Table 19: Redundancy Status of a Line Module

ONLINE LED

REDUNDANT LED
Off Off
On Off
Off On
On On
State of the Line Module
Module is booting or is an inactive primary line module.
Module is active, but no standby module is available.
Module is in standby state.
Module is active, and a standby module is available.
Copyright © 2010, Juniper Networks, Inc.