Table of Contents
Advertisement
ERX 11.3.x Module Guide
Cables and connectors
LEDs
Alarms, errors, and events
62
SC full duplex
Tx power:
min: –15 dBm
max: –8 dBm
Center wavelength: 1310 nm
Rx input power:
min: –31 dBm
max: –8 dBm
Rated for 15 km (9.3 miles) of 9-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
See "Module LEDs" on page 109.
See Monitoring SONET/SDH Interfaces in JunosE Physical Layer Configuration Guide,
Chapter 3, Configuring Unchannelized OCx/STMx Interfaces.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Related Manuals for Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010
Related Products for Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010
- Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - E120 AND E320 MODULE GUIDE REV 01-10-2010
- Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - E120 AND E320 HARDWARE GUIDE REV 9-29-2010
- Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX HARDWARE GUIDE REV 26-9-2010
- Juniper TX Matrix RE-600
- Juniper TX Matrix RE-1600
- Juniper TX Matrix RE-2000
- Juniper NETWORKS STRM - TECHNICAL NOTE REV 6-2008
- Juniper JUNOS - NETWORK OPERATION GUIDE REV1