Chapter 6, Managing Modules - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

SRP-5G+ Module Combination (1-GB Memory)
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
LEDs
Alarms, errors, and events
Copyright © 2010, Juniper Networks, Inc.
SRP-5G+
SRP I/O
7
First supported: 4.1.3 or later 4.1.x release, 5.0.4 or later 5.0.x release, 5.1.2
or higher-numbered release, 5.2.0
Final supported: Not applicable
125 W
Switch route processor (5 Gbps)
Has a minimum of 1 GB of error checking and correction (ECC) memory with
a 1-GB nonvolatile storage (NVS) card.
The 512–MB version has reached end-of-life.
Not applicable
Ethernet (IEEE 802.3)
10/100Base-T
RS-232
Not applicable
ERX705 Broadband Services Router
SRP-5G+
1:1 redundancy
Terminal blocks
BNC, 75–ohm
Wire wrap posts
RJ-45
RS-232 (DB-9)
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more
information.
See "Module LEDs" on page 109.
See Monitoring Modules in JunosE System Basics Configuration Guide,

Chapter 6, Managing Modules.

SRP-5G+ Module Combination (1-GB Memory)
81